TQGF-8000A Fully Automatic Industrial Analyzer

　　FEATURES:

　　1. Experimental process: The process is standardized, the results are accurate, and the experimental process, conditions, and results for moisture, ash content, and volatile matter all meet the requirements.

　　2. Interface method: adopting CAN bus technology, using shielding devices and protective circuits for lightning protection, anti magnetic interference, and anti stimulation interference.

　　3. Fast testing speed: The device can be turned on for testing, equipped with a constant temperature drying device. The three indicators of moisture, ash content, and volatile matter can be combined or measured separately. At the same time, testing the three indicators of 20 samples can be completed within 90 minutes (rapid method process). Fast testing speed: The test can be conducted immediately upon startup, with an external display screen that displays weight in real-time for easy control of sample weight.

　　4. Control mode: bit machine control. More effective control of host operations is not caused by uncontrollable factors unilaterally caused by the computer. Fault alarm self-protection. And use micro technology to locate the displacement of functional components.

　　5. Analysis and testing system: It can connect to the majority of our company's coal quality analysis equipment. Automatically upload data and produce reports. Users can design reports according to their own needs.

　　6. The water ash volatile component equipment adopts an electric slow mode to automatically open and close the furnace door, avoiding damage to the furnace body caused by sudden cooling and heating.

　　Reliable data:

　　1. Using an automatic thermogravimetric analyzer, the balance records the raw data for calculation.

　　2. Adopting the temperature drift correction function of the balance to make the weighing data more accurate.

　　3. Classic slow ash can be used for each ash content test, which meets the national standard requirement of raising the furnace temperature to 500 ℃ within no less than 30 minutes, ensuring the accuracy of ash content testing.

　　Product parameters:

　　Sample weight: 0.8-1.2g, particle size: ≤ 0.2mm

　　Furnace temperature range: room temperature -1000 ℃;

　　Temperature control accuracy: ± 1 ℃,

　　Temperature control points: moisture content 105-110 ℃, ash content 815 ± 10 ℃, volatile matter 900 ± 10 ℃

　　Testing time:<90Min/20 samples,<150Min/24 samples (moisture, ash content, volatile matter and calculated fixed carbon, calorific value)

　　Voltage: 220 ± 22VAC, 50 ± 1HZ, maximum power:<5KW

　　Size mm: 480 * 520 * 700